MVI56-PDPMV1, Prosoft-technology Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

 

Contacs: Mai Văn Vinh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com     

                 www.tudonghoa.biz              
                 www.facebook.com/khotudonghoa

PROFIBUS DP-V1 Master Network Interface Module for ControlLogix

MVI56-PDPMV1

The MVI56 PROFIBUS DP-V1 Master Network Interface Module allows ControlLogix processors to easily communicate with slave devices supporting PROFIBUS DP-V0 and DP-V1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.

Architectures

Click on image(s) to enlarge

Features and Benefits

The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.

The module acts as an input/output module between the PROFIBUS network and the ControlLogix processor. Data transfer from the processor is asynchronous with the I/O data transfer on the PROFIBUS network. Databases are user-defined and stored in the module to hold the data required by the protocol.

Specifications

• Single Slot - 1756 backplane compatible
• The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
• Ladder Logic is used for data transfer between module and processor. Sample ladder file (add-on instruction) included.
• Local or remote rack
• Configurable I/O backplane sizes allow optimal performance for remote rack applications
• CIPconnect™ enabled. Module supports communications with ProSoft Configuration Builder and FDT comDTM via Ethernet routing using Rockwell Automation Ethernet interface.

Downloads

ProSoft Configuration Builder
MVI56-PDPMV1 Datasheet	78.22 kB	Last Modified 12/30/2015
MVI56(E) Add-On Profile	6.48 MB	Last Modified 05/22/2013
MVI56-PDPMV1 Add-On Instructions	23.99 kB	Last Modified 08/14/2015
MVI56-PDPMV1 Configuration File	649 B	Last Modified 05/12/2010
MVI56-PDPMV1 Sample Ladders	413.22 kB	Last Modified 08/14/2015
MVI56-PDPMV1 User Manual	5.26 MB	Last Modified 07/29/2015
PROFIBUS comDTM	8.04 MB	Last Modified 12/13/2013
PROFIBUS comDTM Quick Start Guide	695.02 kB	Last Modified 05/12/2010
MVI56-PDPMV1 EDS File	1.20 kB	Last Modified 10/07/2015

Hardware

Specification	Description
Backplane Current Load	800 mA @ 5.1 VDC  3mA @ 24 VDC
Operating Temperature	32° F to 140° F (0° C to 60° C)
Storage Temperature	-40° F to 185° F (-40° C to 85° C)
Shock	30 g Operational 50 g non-operational
Vibration	5 g from 10 to 150 Hz
Relative Humidity	5% to 95% (without condensation)
LED Indicators	Module Status Backplane Transfer Status Application Status Serial Activity and Error LED Status
Debug/Configuration port (CFG)
CFG Port (CFG)	RJ45 (DB-9M with supplied cable) RS-232 only CIPconnect™ Ethernet routing using 1756-ENBT, 1756-EN2T or similar
Shipped with Unit	RJ45 to DB-9M cables for each port 6-foot RS-232 configuration cable

MVI56E-MNET/MNETXT | Modbus TCP/IP Client/Server Enhanced Network Interface Module for ControlLogix

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Contacs: Mai Văn Vinh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

Modbus TCP/IP Client/Server Enhanced Network Interface Module for ControlLogix

MVI56E-MNET/MNETXT

The MVI56E Modbus TCP/IP Client/Server Enhanced Communication Module allows Rockwell Automation ControlLogix processors to interface easily with Modicon Programmable Automation Controllers (PACs) and a wide variety of Modbus TCP/IP-compatible instruments and devices.

MVI56E enhancements include local and remote configuration and diagnostics through the module's Ethernet port, CIPconnect technology for bridging though Rockwell Automation ControlNet and EtherNetIP networks, and an on-board web server for access to module documentation and sample program files.

The MVI56E-MNET and MVI56E-MNETXT are functionally the same. The MVI56E-MNET is designed for standard process applications. The MVI56E-MNETXT is designed for the Logix-XT control platform, allowing it to operate in extreme environments, at higher operating temperatures, and has a conformal coating to protect it from harsh or caustic conditions.

Backward Compatibility	Upgrade earlier MVI56-MNET modules without changing existing ladder logic programs or module configurations Enhanced features and flexibility without incurring expensive reprogramming costs
For Extreme Environments(MVI56E-MNETXT Only)	Conforms to the EN60079-0 and EN60079-15 standards for applications in caustic and extreme temperature environments Operates in temperature extremes from -25° to 70° C (-13° to 158° F) Conformal coating protects against caustic or corrosive environmental elements
RSLogix 5000 Integrated	Module communication is integrated within RSLogix 5000 using a sample Add-On Instruction (AOI) or sample ladder logic file
Graphical User Interface Software	ProSoft Configuration Builder software (PCB) provides online or offline configuration and diagnostics using high-speed Ethernet port CIPconnect-enabled, allows remote configuration and dignostic access across multiple bridged EtherNet/IP and ControlNet networks using Rockwell Automation 1756-ENxT and 1756-CNB network interface modules
Web-enabled Ethernet port with Discovery Service	Module Ethernet port provides a web server for local access to documentation, module status, and firmware update software ProSoft Discovery Service, a software utility to locate MVI56E modules on the network and assign a temporary IP address for easy configuration

Specifications

• Backward-compatible with previous MVI56-MNET version
• Single-Slot 1756 ControlLogix backplane compatible
• 10/100 Mbps auto crossover detection Ethernet configuration and application port
• User-definable module data memory mapping of up to 5000, 16-bit registers
• CIPconnect-enabled network configuration and diagnostics monitoring using ControlLogix 1756-ENxT and 1756-CNB modules and EtherNet/IP pass-through communication
• ProSoft Configuration Builder (PCB) software supported, a Windows-based graphical user interface providing simple product and network configuration
• Sample ladder logic and Add-On Instructions (AOI) are used for data transfer between module and processor
• Internal web server provides access to product documentation, module status, diagnostics, and firmware updates
• 4-character, alpha-numeric, scrolling LED display of status and diagnostics data in plain English - no cryptic error or alarm codes to decipher
• ProSoft Discovery Service (PDS) software used to locate the module on the network and assign temporary IP address
• Personality Module - a non-volatile industrial-grade Compact Flash (CF)card used to store network and module configuration, allowing quick in-the-field product replacement by transferring the CF card

Modbus TCP/IP Specifications

• ProSoft Technology's Modbus TCP/IP implementation (MNET) includes both Client (Master) and server (slave) capabilities
• Modbus data types overlap in the module's memory database, so the same data can be conveniently read or written as bit-level or register-level data
• Configurable floating point data movement is possible, including support for Enron or Daniel floating point formats

Modbus TCP/IP Server (Slave)

• Supports five independent server connections for Service Port 502 (MBAP)
• Supports five independent server connections for Service Port 2000 (Encapsulated)
• Accepts Modbus Function Codes 1, 2, 3, 4, 5, 6, 8, 15, 16, 17, 22 and 23
• Module data can be derived from other Modbus server devices on the network through the Client or from the ControlLogix processor

Modbus TCP/IP Client (Master)

• Actively reads data from and writes data to Modbus TCP/IP devices, using MBAP or Encapsulated Modbus message formats
• Transmit Modbus Function Codes 1, 2, 3, 4, 5, 6, 7, 15, and 16
• Offers one Client connection with up to 100 commands to talk to multiple severs
• ControlLogix processor can be programmed to use special functions to control the activity on the Client by actively selecting commands to execute from the command list (Command Control) or issuing commands from ladder logic(Event Commands)

Status Data

• Error codes, counters, and module status available from module memory through the Server, through the Client, or through the ladder logic and controller tags in RSLogix 5000

Hardware

Specification	Description
Backplane Current Load	800 mA @ 5 V DC 3 mA @ 24V DC
Operating Temperature	-25° to 70°C (-13° to 158°F) - MVI56E-MNETXT
Storage Temperature	-40 to 85°C (-40 to 185°F)
Shock	30g Operational 50g non-operational Vibration: 5 g from 10 to 150 Hz
Relative Humidity	5% to 95% (non-condensing)
LED Indicators	Battery Status (ERR) Application Status (APP) Module Status (OK)
4-Character, Scrolling, Alpha-Numeric LED Display	Shows Module, Version, IP, Application Port Setting, Port Status, and Error Information
Debug/Configuration/Application Ethernet port (E1)
Ethernet Port	10/100 Base-T, RJ45 Connector, for CAT5 cable Link and Activity LED indicators Auto-crossover cable detection
Shipped with Unit	5-foot Ethernet straight-through cable

Videos

 download video

Certifications

Ex Certificate (ATEX Directive)	56.11 kB	Last Modified 04/01/2015
CB Safety	327.83 kB	Last Modified 05/20/2014
CE Mark	90.91 kB	Last Modified 02/05/2015
Russian GOST-R	1.23 MB	Last Modified 11/01/2012
GOST-R Declaration of Conformity	6.68 MB	Last Modified 11/01/2012
Korean KC Registration	622.72 kB	Last Modified 11/01/2012
Lloyd's Register	2.13 MB	Last Modified 11/01/2012
UL/cUL; Class 1, Div 2	1.12 MB	Last Modified 05/20/2014
UL/cUL; Class 1, Div 2 (Canada)	1.14 MB	Last Modified 05/20/2014

ProSoft Configuration Builder		Last Modified 03/18/2014
MVI56E-MNET/MNETXT Datasheet	330.48 kB	Last Modified 09/10/2014
MVI56E-MNET(XT) User Manual	3.08 MB	Last Modified 09/23/2014
MVI56(E) MNET Add-On Instruction	61.66 kB	Last Modified 02/27/2015
MVI56E-MNET Sample Ladder	7.73 MB	Last Modified 02/13/2015
MVI56E-MNET EDS File	597 B	Last Modified 05/11/2010
ProSoft Discovery Service v1.1.4.4	22.63 MB	Last Modified 04/28/2014