MVI56-PDPMV1, Prosoft-technology Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

 

Contacs: Mai Văn Vinh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com     

                 www.tudonghoa.biz              
                 www.facebook.com/khotudonghoa

PROFIBUS DP-V1 Master Network Interface Module for ControlLogix

MVI56-PDPMV1

The MVI56 PROFIBUS DP-V1 Master Network Interface Module allows ControlLogix processors to easily communicate with slave devices supporting PROFIBUS DP-V0 and DP-V1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.

Architectures

Click on image(s) to enlarge

Features and Benefits

The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.

The module acts as an input/output module between the PROFIBUS network and the ControlLogix processor. Data transfer from the processor is asynchronous with the I/O data transfer on the PROFIBUS network. Databases are user-defined and stored in the module to hold the data required by the protocol.

Specifications

• Single Slot - 1756 backplane compatible
• The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
• Ladder Logic is used for data transfer between module and processor. Sample ladder file (add-on instruction) included.
• Local or remote rack
• Configurable I/O backplane sizes allow optimal performance for remote rack applications
• CIPconnect™ enabled. Module supports communications with ProSoft Configuration Builder and FDT comDTM via Ethernet routing using Rockwell Automation Ethernet interface.

Downloads

ProSoft Configuration Builder
MVI56-PDPMV1 Datasheet	78.22 kB	Last Modified 12/30/2015
MVI56(E) Add-On Profile	6.48 MB	Last Modified 05/22/2013
MVI56-PDPMV1 Add-On Instructions	23.99 kB	Last Modified 08/14/2015
MVI56-PDPMV1 Configuration File	649 B	Last Modified 05/12/2010
MVI56-PDPMV1 Sample Ladders	413.22 kB	Last Modified 08/14/2015
MVI56-PDPMV1 User Manual	5.26 MB	Last Modified 07/29/2015
PROFIBUS comDTM	8.04 MB	Last Modified 12/13/2013
PROFIBUS comDTM Quick Start Guide	695.02 kB	Last Modified 05/12/2010
MVI56-PDPMV1 EDS File	1.20 kB	Last Modified 10/07/2015

Hardware

Specification	Description
Backplane Current Load	800 mA @ 5.1 VDC  3mA @ 24 VDC
Operating Temperature	32° F to 140° F (0° C to 60° C)
Storage Temperature	-40° F to 185° F (-40° C to 85° C)
Shock	30 g Operational 50 g non-operational
Vibration	5 g from 10 to 150 Hz
Relative Humidity	5% to 95% (without condensation)
LED Indicators	Module Status Backplane Transfer Status Application Status Serial Activity and Error LED Status
Debug/Configuration port (CFG)
CFG Port (CFG)	RJ45 (DB-9M with supplied cable) RS-232 only CIPconnect™ Ethernet routing using 1756-ENBT, 1756-EN2T or similar
Shipped with Unit	RJ45 to DB-9M cables for each port 6-foot RS-232 configuration cable