PLX8X-MNET-61850 | Modbus TCP/IP to IEC 61850 Gateway | Prosoft-technology Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

Modbus TCP/IP to IEC 61850 Gateway

PLX8X-MNET-61850

The ProLinx® Modbus TCP/IP to IEC 61850  gateway enables communication between the Intelligent Electronic Devices (IEDs) on an IEC-61850 network and Programmable Logic Controllers (PLCs) or Programmable Automation Controllers (PACs) on a Modbus TCP/IP network.

The configuration utility software provided with the gateway uses IED configuration files to import complex IEC 61850 data structures. The utility creates Variable files and Function Block files for import into Unity Pro projects for Quantum or M340 processors.

IEC 61850 is the international standard that defines the hardware and communication requirements for all devices within substation automation. The standard­ized naming conventions imposed by the IEC 61850 standard improves interoper­ability between systems provided by diverse manufactures or created by multiple system integrators.

Architectures

Click on image(s) to enlarge

Features and Benefits

Configuration Utility Integrates Tightly with Unity Pro	Application-specific Variable and Function Block files are automatically generated. Users are not required to develop communication logic or tag structures in their PLC or PAC projects.
Configuration Archive and Diagnostics	The gateway configuration file is stored in an industrial SD card. This allows for rapid disaster recovery by moving the SD card from a failed gateway to a replacement gateway. Extensive diagnostics for the gateway and for both Modbus TCP/IP and IEC 61850 networks are available via the configuration utility.
Import Configured IED files	All IED data attributes are available for convenient mapping to Modbus registers.
Modbus TCP/IP Client/Server support	Enables multiple Modbus TCP/IP devices or SCADA devices to interface with IEC 61850 devices simultaneously.

Specifications

Hardware	Two (2) Ethernet ports for Modbus TCP/IP and IEC 61850 communication
Software	ProSoft 61850 Configuration Manager for configuration and diagnostic viewing ProSoft 61850 Tag Monitor for viewing live tag data ProSoft Discovery Service for setting a temporary IP address
Configuration Storage	Configuration settings saved on a removable 1GB Industrial SD Card ProSoft 61850 Configuration Manager saves configuration information to an offline file.

Specifications – IEC 61850 Client

• Supports up to 45 IEDs

• Send commands from the PLC or PAC to the IED using Control Types
  • Direct-with-Normal-Security
  • Select Before Operate (SBO)-with-Normal-Security

ASCI Basic Conformance
SCSMs supported	SCSM: IEC 61850 8.1(MMS) used
Generic substation event model (GSE)	Subscriber
ASCI Model Conformance
Reporting	Buffered Report Control Block (BRCB) Unbuffered Report Control Block (URCB)
GOOSE	entryID, DataReflnc
Control	Direct-with-Normal-Security SBO-with-Normal-Security Direct-wtih-Enhanced-Security SBO-with-Enhanced-Security
Logical Nodes	IEC-61850 Logical Nodes, including Logical Nodes for Hydro Power Plants and Logical Nodes for Wind Power Plants
Configurable Parameters	MMS Command Delay
Status Data	Status available per node Report and GOOSE status available High-level status data available from Modbus TCP/IP Client through the MNET server (for example PLC or PAC)

Specifications – SNTP/NTP Client

The gateway supports a Simple Network Time Protocol (SNTP/NTP) client service that can synchronize the gateway’s time by periodic update requests to a Coordinated Universal Time (UTC) system. The user can configure the SNTP/NTP server details in ProSoft 61850 Configuration Manager. The resolution of the time is in milliseconds (ms).

Configurable Parameters

SNTP/NTP server synchronization rate (in minutes) SNTP/NTP server Address

Hardware

Specification	Description
Power Supply	24 Vdc nominal 10 Vdc to 32 Vdc power input allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade
Current Load	200 mA maximum @ 24 Vdc 150 mA maximum @ 32 Vdc 450 mA maximum @ 10 Vdc
Operating Temperature	32°F to 140°F (0°C to 60°C)
Storage Temperature	-40°F to 185°F (-40°C to 85°C)
Relative Humidity	5% to 95% RH, with no condensation
Dimensions	Standard: Height x Width x Depth 4.72 inches x 1.90 inches x 4.18 inches
Ethernet Ports (E1)(E2)	10/100 Base-T half duplex RJ45 Connector Link and Activity LED indicators Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
LED indicators	ERR, CFG, FLT, PWR
Shock and Vibration	Shock and Vibration tested to EN 60068 Standard
Shipped with Each Unit	Two - Ethernet straight-through cables (gray)One - J180 screw terminal plugOne - PLX8x CDOne - HRD250 screwdriverOne - 1GB Industrial SD Card

Downloads

PLX81-MNET-61850 Datasheet	451.74 kB	Last Modified 01/13/2015
PLX82-MNET-61850 Datasheet	432.49 kB	Last Modified 01/13/2015
PLX8X-MNET-61850 User Manual	4.73 MB	Last Modified 05/14/2014
IEC 61850 PICS Statement	221.92 kB	Last Modified 09/18/2012
61850 Tech Note	1.06 MB	Last Modified 09/18/2012
PLX8x-MNET-61850 Configuration Manager	7.44 MB	Last Modified 10/20/2014
ProSoft Discovery Service v1.1.4.2	22.62 MB	Last Modified 05/23/2013

Certifications

CB Safety	35.78 kB	Last Modified 08/27/2012
CE Mark	92.12 kB	Last Modified 02/28/2013
Russian GOST-R	7.07 MB	Last Modified 02/22/2013
GOST-R Declaration of Conformity	6.68 MB	Last Modified 02/22/2013
UL/cUL; Class 1, Div 2	1.08 MB	Last Modified 07/02/2013
UL/cUL; Class 1, Div 2 (Canada)	1.10 MB	Last Modified 07/02/2013